DCC adapter board
This little board is intended to provide a clean and tidy interface between DCC sound chips and NZR locomotives.
The board is supplied with 2x JST 1.5mm pitch connectors and matching prewired plugs.
The design anticipates that the board and chip will be mounted in the locomotive.
- Connections to the chassis for power in and the motor are via the plugs/leads allowing easy disconnection from the chassis for maintenance.
- Connections from the DCC chip are labelled by wire colour.
- The chip wires are routed via a labyrinth to provide strength
- Resistors for LED lighting can be fitted to the board (or jumpers if using lamps)
- Hard connection is provided for the speaker, head light and tail light.
12 in stock